YEAHUI ELECTRONIC LIMITED Yeahui Cable, connector to the world!


Home / blog

Three factors that cause the terminals of connector to be bad

The terminal is a metal piece disposed inside the insulating material of the connector, and its function is to guide the electrical connection between the wire and the electronic device. As the precision of the industrial automation control is more and more strict, the amount of the terminal is always increased, but some bad factors will happen in the process when the terminal is in yeahui introduces three factors that cause the terminals of connector to be bad.

Three factors that cause the connector terminals to be bad

the poor insulation of connector terminals

The function of the connector terminal insulator is to keep the contacts in the correct position and to insulate the contacts from the contacts and the contacts from the housing. Therefore, the insulation must have excellent electrical properties, mechanical properties and process forming properties. In particular, with the high density and wide use of miniaturized terminals, the effective wall thickness of the insulator is getting thinner and thinner. This puts more stringent requirements on insulation materials, injection mold precision and molding processes.

Connector terminals are not fully fixed

The connector terminals need to be fixed at a specific position to achieve a stable connection. If the installation is not perfect or the product insertion and extraction life cycle is insufficient caused the fixing is poor, and the Lighter influences contact and causes instantaneous power failure, and the serious  will disintegrate the product. Disintegration refers to the abnormal separation between the plug and the socket between the plug and the socket caused by the unreliable structure due to the material, design, process, etc., which will cause the power transmission and signal of the control system  to be interrupted. Due to unreliable design, incorrect material selection, improper selection of molding process, poor quality of heat treatment, mold, assembly, welding, etc., assembly failure, etc. will result in poor fixation.

the poor contact of the connector terminals

The metal conductor inside the connector terminal is the core part of the terminal, which transmits power, signal, etc. to other parts in contact with it, so the metal conductor inside the terminal must have good conduction properties. If the contact design is unreasonable, the material selection is wrong, the size is not standard, or the plating layer is improperly handled, the contact of the connector terminals may be poor.

Yahui Electronics Co., Ltd. has been manufacturing connectors for more than 10 years, and we have a professional team to support us. In the process of producing connectors, we are very strict in the detection of quality, and we need to pass multiple tests and screening for each material used. If you want to buy some good quality obd connector, you can come to us to contact us and look forward to your message.

Read more about the connector(How to optimize high-quality High-Speed Connectors).