Yeahui

YEAHUI ELECTRONIC LIMITED Yeahui Cable, connector to the world!

obd Right Angle connector

Home / obd Right Angle connector

Share

24V OBDII male right angle connector24V OBDII male right angle connector

YH1006-2 J1962 24V OBDII Male Right Angle To Open Connector

Model Number: YH1006-2
Certification: ROHS, REACH
Minimum Order: 100pcs
Delivery Time: About 20days
Payment Terms: T/TWestern Union
Supply Ability: 20000 pieces per month

Features

YH1006-2 J1962 24V OBDII Male Right Angle To Open Connector. This J1962 OBD right angle connector are widely used on Telematics Safety Devices.

Usually 26AWG, 28AWG, Pitch=1.27mm flat cable have been used.

All these obd2 flat cables produced according to ISO Standard.

The materials of wires comply with UL and connector meets with Reach/ ROHS Standard.

The Pin-Out, Cable Specification, and cable length can be customized.

Any question for OBDII Flat cable will be prompt response.

Application

YH1006-2 obd2 16p right angle connector with flat cable can be widely used. Such as Telematics Safety Devices, aircraft safety equipment, fleet management system, GPS Tracking Device,Fleet management system, GPS Tracker, M2M Device, UBI Telematics(Usage Based Car-Insurance),auto diagnostic equipment, automotive/auto inspection device, car fault-finding tool, vehicle/garage diagnostic equipment, automotive/auto diagnostic tool, auto/car diagnostic.

products specification
Wire Specification
Cable length 200mm & customized
Cable jacket PVC
Cable pinout Customized
Cable cross-section UL2651 16 Pin 24-28 AWG flat wire (pitch=1.27mm)
Cable Bending testing life NO
Terminals Applied Optical cable NO
Plug test  
Electronic Parameter
Withstand Voltage 300V DC
Insulation Resistance Over 2MΩ
Rated current 1A ~ 3A
Contact Resistance MAX 1Ω (L≤3M)
Wire Rated temperature -20 ~ 105 ℃
Advantages
Yeahui

● This OBDII right angle with flat cable also used on Fleet management system,GPS Tracker, M2M Device, UBI Telematics(Usage Based Car-Insurance).

● OBD2 connector can be as small as possible to meet with your requirement when use standard OBDII connector.

● A PCB have been designed for assembly this flat cable.

● Flat cable used on this OBDII right angle connector will be soldered very well.

● Perfect and Secured Molding can be used to design small obd connector.

● All pins wires can be connected on our OBDII flat cable. But if you just connected 3 pins, 4 pins, 10 pins. We can also meet with your demand.

LEAVE A MESSAGE

  • Name
  • Email
  • Phone
  • All fields are required.